Important Informational Notices

The 2005 National Electric Code (NEC) has been in effect in the State of Idaho, since July 1, 2005.

LEGISLATIVE ISSUES - will be posted here when applicable.

 Bureau Notices

Arc Fault Circuit Interrupter Information
Bath tubs Lights, Switches, and Receptacles - dated May 22, 2007
Electrical Metallic Tubing - (EMT) "Rain Tight" Fittings
Light Pole Installation and Inspection Procedures - Effective August 11, 2004
NEC 2002 Article 210.8 (B) (3)-Kitchens/Non-dwelling
NEC-Article 210.63 - Heating, Air Conditioning, and Refrigeration Equipment Outlet for MFH
NEC Article 422.16 (A) - Cords/Cord Caps - Disconnects
NEC Article 440.65 LCDI & AFCI on Single-phase cord-and-plug-connected room air conditioners
NEC Article 605 - Office Furnishings Consisting of Lighting Accessories and Wired Partitions.- dated December 16, 2004 - The State of Idaho requires a licensed electrical contractor and licensed journeyman to install the branch circuitry, feeder and the internal wiring of the listed office furnishing partitions (modules).
Rules Governing Modular Buildings

 Information on Pools/Hot Tubs/Spas

Spa's/Hot-tubs-Article 680.42(C) Interior Wiring to Outdoor Locations
Hot Tub & Spa Circuit Requirement
Swimming Pools / Spas / Hot Tub Requirements

 Licensing Notices

Apprentice Requirements - Effective July 1, 2004
Master Requirements - Effective July 1, 2004

 Public Notices

UL Warns of Counterfeit Lighting Fixtures
AFCI Problems
NEMA (National Electrical Manufacturer's Association) - Guidelines for Handling Water Damaged Electrical Equipment
Underwriters Laboratories Inc. News Releases (for potentially hazardous products and equipment)
UL Warns of a Potentially Hazardous Heavy-Duty Dryer Cord
UL Warns of potential electric shock hazard with Ground Fault Circuit Interrupter (GFCI)

 Safety Notice Recall